See photos and comments for condition of parts. Please wait... Many photos to load
600 Engine Parts - All parts are used and have been cleaned and inspected. Condition is noted under each piece with price. These are extra parts I have obtained during my restoration project that I do not need. Items pictured are not necessarily the items for sale - I will provide actual picture of item upon request.
These are new metric "O" rings for the oil filters. Two are required for an oil change - they are sold in sets of two..
Oil Filler Cap $30.00 ea
This cap has been bead blasted and the center cap repainted red.
Oil Pan Screen $15.00
This screen is clean and in like new condition
Crankshaft Bearing Support $120.00 Exchange
This is a service to repair these bearing supports. I do have several that I will sell (repaired units) at $145.00 each without exchange. Email me for details
Dipstick $35.00 ea
This dipstick has been cleaned and the top loop repainted red.
Crankshaft (used) $400.00
This is a good used crankshaft. It has been checked for trueness and the rod bearings are all in good condition. The rods have been flushed with solvent and then with fresh oil.
Crankshaft (core) $140.00
This crankshaft is a used shaft with a bad front (flywheel side) rod bearing. It is good to return for a core so you can obtain a spare crankshaft.
Oil Slinger Spacer (rear) $15.00
This s the spacer between the oil slinger ring and the rear crankshaft support bearing (armature side).
Oil Slinger Spacer (front) $15.00
This s the spacer between the oil slinger ring and the front crankshaft support bearing (flywheel side).
Piston Standard Size $150.00
This piston is standard size and come with pin and pin keepers. This is a used piston. Rings not included.
Cylinder - Stand. Bore $200.00
This cylinder is standard bore and within specifications. It has been honed and ready to install.
Cylinder - Stand. Bore $100.00
This cylinder is standard bore but has some rust marks in the cylinder walls. It would be good for boring oversize or having it lined. Contact me for companies who will bore these cylinders.
Valve Lifter $65.00 ea
This lifter is in good condition ready for use.
Lock Ring for Cam Bearing $2.00
This lock ring is in like new condition
Cam Shaft Gear $125.00
Gears are in fair condition - email me for availability and "marked" number.
Oil Pump Shaft $65.00
This shaft is in very good used condition, ready to install in your engine.
Oil Pump Driven Gear $20.00
This is the driven gear in the oil pump. It is in very good condtion.
Oil Pump Cover Plate $10.00
This gear is in good used conditon.
Oil Filter Cover $20.00
This is the cover for the oil filter. It has been bead blasted, primed and painted gloss black.
Clutch Pressure Plate $100.00
This piece is in good condition.
Flywheel $75.00
This flywheel has been blead blased and primed (tape is covering friction surface to prevent rust while in storage). Please specify size of center hole - I have both sizes available.
Cooling Fan Cover $70.00
This cover has been bead blased and clear coated for lasting luster.
Cooling Fan $150.00
This fan has been bead blased and clear coated for lasting luster. The TDC blade was repainted red.
Front Oil Slinger $55.00
This is the oil slinger closest to the flywheel. It has been cleaned and is ready to install.
Picture to come
Picture to come
Rear Oil Slinger $35.00
This is the oil slinger closest to the dynastart. It has been cleaned and is ready to install.
Picture to come
Rocker Arm $40.00
This is a complete rocker arm, please specify intake or exhaust.
Picture to come
Engine Case $125.00
This case is in excellent condition. It has been cleaned and is ready to use.
If you don't see what you need email me - I do have other parts not listed - or check the Link to other sites for parts suppliers.
Engine
